Jinan Coton Glass Co., Ltd
Model No.: CTTGC017
Appearance: Flat Tempered
Steel Degree: Tempered Glass
Thickness of Flat Tempered Glass: 10MM
Technics: Physically Tempered
Flatness: High Class
Usage: Building, Furniture, Home Appliance, Daily Products
Packaging: ply wood cases
Tempered Glass is obtained by cutting the ordinary annealed glass into the required sizes and then heating it to about 700 degrees near the softening point, and then performing rapid and
uniform cooling (usually 5-6mm glass is heated at 700 degrees for 240 seconds). Cool down for about 150 seconds. 8-10mm glass is heated at 700 degrees for about 500 seconds, and the
temperature is lowered by about 300 seconds. In short, depending on the thickness of the glass, the time for heating and cooling is different. After the tempering treatment, the surface of
the glass forms a uniform compressive stress, while the inside forms a tensile stress, which improves the bending and impact strength of the glass, and its strength is about 4 times that of
the ordinary annealed glass. The tempered glass that has been tempered can no longer be processed.
High Strength: Compared to Float Glass with the same height,tempered glass possesses a bending and impact resistant strength three to five times higher.
Safety: Being hard to be broken by impact and becoming very small particle fragments with obtuse angles tempered glass cause no injuries to human body.
Copyright © 2019 Jinan Coton Glass Co., Ltd All rights reserved.